Your Device Is Not Available for Live View at This Time. Try Again Later. Ring

RobotPoweredHome is reader-supported. When you buy through links on my blog, I may earn an affiliate commission. Every bit an Amazon Acquaintance, I earn from qualifying purchases.

The Band Doorbell is a nifty little gadget that brings the efficacy of technology literally to your doorstep past allowing y'all to monitor your front door from anywhere.

The Band Doorbell detects motion, sends y'all notifications, and most importantly, allows you to view the video feed alive from your personal device.

Even though saving recorded footage requires a Band subscription, live streaming from the Ring Doorbell is free.

Sometimes, this live video feature (also called Alive View) doesn't work well and in this article, we discuss why this could be happening and how you lot tin can ready this issue.

The Ring Doorbell is a smart doorbell that is e'er connected, which basically ways that it relies on your abode Wi-Fi connexion to function.

Thus, if you lot cannot access Alive View on your Band Doorbell or run across the recorded videos, and then the virtually likely cause of this is poor network connectivity.

This means that either the Ring Doorbell can't achieve your router or your internet might just exist likewise irksome.

This outcome is usually fixed past rebooting your router, relocating it closer to the Ring Doorbell, or upgrading to a faster net plan.

Keep reading the article to figure out other issues that may cause Alive View to not work and how to solve them.

What are the most mutual reasons for Alive View Non Working on the Ring Doorbell?

Ring Doorbell is not online

The Ring Doorbell is a smart device that needs to be constantly connected to the internet to function properly.

Thus, if it does not take access to a Wi-Fi connection, well-nigh of its features will also not function properly, including the Live View feature.

One of the almost mutual reasons for Live View to not work is simply because Ring Doorbell has no access to the net, leading it to not go live.

Internet connection is unreliable or tedious:

Sometimes the Ring Doorbell may have access to the internet via your domicile Wi-Fi connection, merely the connection itself could be deadening or unreliable.

If the connexion is dull then the Alive View will take a long time to load and buffer continuously and thus, not work properly.

On the other hand, if the connection keeps getting lost and is unreliable, then the Alive View will only not load.

This is because, for the Alive View feature to work, the Ring Doorbell needs to continuously upload data, which requires a consistent internet connection.

Insufficient Ability Delivered to the Ring Doorbell

The Band Doorbell works on both an in-congenital battery every bit well equally direct from a ability supply.

In case you lot have not installed fill-in internal batteries and rely solely on the power supply, so when power outages or voltage fluctuations occur, you will not be able to use the Alive View feature because the Band Doorbell is not getting enough ability.

Faulty Photographic camera

Sometimes the problem may lie in the camera of the Ring Doorbell itself. If the camera is non functioning properly then the Live View feature volition not piece of work.

Even if the camera is functionally intact at that place are instances where a cleft on the photographic camera lens or something blocking its field of view can crusade the Alive View feature to not part correctly.

Bad Wiring

Wiring is essential for the functioning of the Ring Doorbell, and bad wiring tin cause many features of the Ring Doorbell to not work.

If the Alive View is choppy and freezes from time to time, and so the issue might just exist that the wiring of the Ring Doorbell is faulty.

Apart from causing Alive View to stop working, faulty wiring can too crusade other issues like stopping the doorbell from ringing, so you can easily place this problem.

Starting time by hardwiring your Ring doorbell to see if that fixes the issue.

How to Troubleshoot Ring Doorbell Live View Not Working

Ensure Consequent and Fast Internet Connectedness

The Ring Doorbell needs internet to function, and thus, ensuring that it has a consistent connection to fast Wi-Fi tin can solve many of the problems which occur.

When Live View does not piece of work, the first affair y'all need to do is to double-bank check your Wi-Fi connection and make sure that the Ring Doorbell is connected to information technology.

Often, just reconnecting the Ring Doorbell to your Wi-Fi can solve the trouble of Live View not working.

Fix Router Position and Traffic

Even if y'all accept a good and fast internet connection, the Band Doorbell Live View characteristic might non work because the position of your router with respect to your Ring Doorbell may be wrong.

The router should exist close plenty to your Ring Doorbell to endure a strong connectedness.

Some other event might exist that there are many users already using your Wi-Fi band, which causes connexion problems for the Ring Doorbell.

So if you live in a residential surface area where there might exist many people using Wi-Fi, then switching to the 5GHz band on your router can help the Band Doorbell maintain a better network connection.

Fix Wiring Problems

Another common reason for Live View to non piece of work is due to faulty wiring and power supply problems.

Get your wiring checked by an electrician to rule out faulty wiring issues.

Faulty wiring bug can non only crusade many features of the Band Doorbell to not work but tin can also permanently impairment the device.

Set Power Supply Issues

Ability outages and voltage fluctuations tin cause the Live View feature of the Ring Doorbell to non work properly.

This can also exist a hindrance to the doorbell getting charged. To avoid such a state of affairs, it is always advisable to install the fill-in internal battery in the Ring Doorbell.

You tin even completely switch to the internal battery instead of using an external power supply if you want to ensure consistent power delivery to the Band Doorbell at all times. A Ring Doorbell Battery lasts about half-dozen-12 months, and so you lot can ensure that you lot have no downtime by buying two.

Using an internal battery can help solve the Live View non working issue of the Ring Doorbell.

If Nothing Works To Ready The Live View Not Working On the Ring Doorbell

The problems and troubleshooting options we have listed should be able to fix your Ring Doorbell Live View not working issue, only sometimes even when you accept tried them all out, Live View may still not be working properly.

At this bespeak, the best decision would be to contact Band back up, where can ask for help directly from the experts, and Ring will try activating your device.

Conclusion

The truth is that Ring, despite the consistent updates and hardware advances, is far from perfect.

This is evident in a lot of ways including how their Alarms are not equipped with glass break sensors.

The Live View problem, yet, tin exist stock-still with all the steps detailed above.

If nothing fixes it, I would recommend you call Band back up.

Y'all May Also Savor Reading:

How To Reset Ring Doorbell 2 Effortlessly In Seconds
Ring Doorbell Not Ringing: How To Fix It in minutes
Ring Doorbell Not Connecting To Wi-Fi: How To Set It?
Does Band Piece of work With HomeKit?
How To Save Ring Doorbell Video Without Subscription: Is It Possible?

Frequently Asked Questions

How do I enable Live View on Ring Doorbell?

To enable Alive View on Ring Doorbell, become to the Band app on your device, and at the very top, you'll run across all your Ring devices.

Select which Ring Doorbell unit you desire to view Live View for, and so click on the Live View option

Where is the reset push button on ring doorbell two?

The reset push button is located nether the faceplate of the Ring Doorbell. To remove the faceplate, you need to showtime unplug the Ring Doorbell from the ability supply.

Once you've removed the faceplate, you'll see the reset button.

Why does it accept and then long to activate my ring doorbell?

The activation of your Band Doorbell is slow, mainly because of internet connectivity issues.

Your cyberspace could be slow, the Ring Doorbell may non exist able to connect to your router, or the router may be too far from the Ring Doorbell.

Why does the My Ring app keep saying activating device?

The Ring app shows this bulletin when it is trying to establish a connexion with the Ring Doorbell; thus if the connection is faulty this message persists.

To solve this, make certain that the Ring Doorbell is continued to the internet and that your device is also connected to the internet.

etheredgefittold.blogspot.com

Source: https://robotpoweredhome.com/ring-doorbell-live-view-not-working/